Good day to all!
The most wonderful holiday is approaching - the New Year. Many are preparing for it for a month. Say something too early? However, it is never too early to acquire jewelry, and even vice versa. Especially if you decide to make some decorations with your own hands, for example. What can be interesting to do. First of all, it is, of course, snowflakes. What are we making them from? From paper.
In this article we will try to make paper snowflakes, as well.
It is quite easy to make snowflakes out of paper. You need paper and scissors. We take paper, fold it several times to make a triangle. Like this:
Now it remains only to cut out the patterns. Draw the desired pattern along the edges of the triangle and cut it out. After that, we unfold the paper and get a beautiful patterned snowflake.
From what pattern you draw, this will be the snowflake. There is no limit to the imagination here. You can cut, for example, such a snowflake:
Or like this one:
In addition to ordinary snowflakes, you can make a three-dimensional one. Here the production scheme is somewhat different.
If we make a snowflake of six rays, we will need six sheets of paper, if we make an eight-ray snowflake - eight, etc. On each sheet of paper, cut out a square measuring 10x10 cm or more. The larger the size of the sides of the square of the blank, the larger the snowflake itself will be, respectively. Now, at some distance from each other, draw parallel lines to make several squares inside a sheet of paper. Approximately as in the diagram.
The next step is to take scissors and make cuts along the drawn lines (red). We do not cut it out, but we only cut it so that these squares are fixed from two opposite corners.
Next, take the central square (shown by an arrow in the figure) and fold its edges into a tube, towards the center. Glue the ends. Then we turn the sheet over and on the reverse side we do the same operation with another strip. Then we turn over and fold the tube again, and so as many times as you have drawn squares.
In the same way we make all the other blanks. After that, we fasten them together and, as a result, we get a snowflake.
We cut out snowflakes from paper according to patterns that can be printed
You can cut snowflakes not only by folding paper. You can pick up special templates, print, and then cut out your craft using them.
Another fairly simple option.
And this snowflake template is a little more complicated.
If you are bending a piece of paper, but have no idea what pattern to draw to make a beautiful pattern, then here are a few templates.
Or, for example, like this.
This template is a bit complicated, but the result is a beautiful snowflake.
Several templates at once, some of them are simple, some are somewhat more complicated. However, patience and perseverance will help create a masterpiece. And, of course, children, how to cut snowflakes without them.
And a few more templates
Also beautiful, even somewhat openwork patterns.
Here are some great templates you can use.
Schemes for cutting beautiful snowflakes
In this section, you can see some patterns for making snowflakes, according to which you can cut out beautiful crafts.
According to this scheme, you can cut a snowflake, following the step-by-step drawings.
And here is another selection of schemes from several beautiful patterns.
According to this scheme, you can cut several different snowflakes.
Another example is how to fold a sheet of paper and cut out a snowflake.
This diagram shows how to cut out unnecessary parts of the paper (shown in color) to get a beautiful pattern.
Variant of the snowflake scheme with hearts.
And look at this diagram, quite interesting and original drawings.
And according to this scheme, we make a snowflake not only from a square sheet of paper, but also a round one.
Here are some wonderful schemes to choose for manufacturing.
Simple snowflake patterns for beginners in origami technique
Origami is the manufacture of paper crafts without cutting. Snowflakes can also be made using this technique. Here are some diagrams.
In this version, scissors are used, but only to make cuts.
You can make such a snowflake out of paper:
To do this, use the following diagram:
In this version, you make a snowflake from prepared modules.
Then from them we collect the snowflake itself.
Try another scheme by which you can fold a snowflake.
It was all snowflakes, shall we say, in 2-D format. But voluminous snowflakes are also popular.
Video how to make voluminous paper snowflakes with your own hands (video)
Volumetric snowflakes look, of course, more beautiful and original. And if they are also made in a large size, then they will look quite impressive.
And here, watch the video, which clearly tells about the manufacture of such a snowflake.
We make snowflakes from paper strips with our own hands
Volumetric snowflakes can be made using colored strips of paper. For example, you can do something like this:
To do this, take colored paper (colors can be any, to choose from). We cut strips 29 cm long and 0.5 cm wide. We cut about 20 strips.
Now we put strips in the form of a cross, 4-5 pieces, alternating colors. We put them intertwining with each other.
First, we glue the most extreme strips with each other (they are yellow in the figure) we should get something like an auto-decoupling on the map.
The remaining strips (white in the figure) are glued to the corners of the opposite yellow petals. As a result, we get a snowflake, as in the sample at the very beginning of the description.
An easy way to make 3D snowflakes step by step
Volumetric, or 3-D snowflakes look a little better than simple ones. Let's try to do this.
Take a square sheet of paper and fold it several times until you get a triangle. You need to make six such triangles. And they should all be the same. Now, on each triangle we draw parallel lines at a distance of about 1 cm. The number of such lines depends on the size of the triangle and there can be three or more of them. Now we cut through these strips from one edge to the other, but, of course, not to the very end.
We turn the triangle back into a square and fold its central part and glue it together.
We turn the square over with the other side and glue the next notched square in the same way.
Flip and repeat. And so on until we glue all the cut strips. A similar procedure is carried out with all blanks. After that, we fasten together first three figures, then the remaining three.
As a result, we get such a snowflake.
or such.
Its size depends on the paper size. This craft requires a little more time and more painstaking work compared to simple snowflakes. But the result is worth it.
Quilling snowflake master class for beginners (video)
Quilling is a technique for making paper crafts that are cut into strips and rolled. After that, all these twisted blanks are connected and we get the intended craft. For example, such wonderful snowflakes.
How to make snowflakes using quilling technique, see this video
So, we looked at various ways to create New Year's snowflakes. Choose, craft and decorate your homes. Good luck!
Good afternoon dear friends. Pre-New Year chores will begin very soon and it will be necessary to have time to do a huge number of things. From decorating windows with paper snowflakes to decorating an apartment for the New Year. Also, do not forget that you will need to choose a gift or gifts for each family member, and even about the fact that you will need to prepare a lot, I am generally silent about this, since this is a special expense item.
And of course, everyone wants to decorate their home in such a way that it would be the best and most beautiful on the street or in the entrance. And this dear friends can be done without much cost. You can decorate your windows with paper snowflakes and not spend almost a penny on it. Below in the article you can find a variety of patterns for cutting paper snowflakes.
Even if you don't have a printer to print these patterns, you can hold a sheet of paper to the screen and trace the pattern with a pencil.
Making paper snowflakes is a very fun family activity as the whole family can take part in decorating. When we were kids, we had competitions to see who would have the prettiest snowflake.
In order to cut a snowflake you will need
1 sheet of A4 paper
Scissors
Cutting steps
We take a simple sheet of paper. The photo shows the diagonals along which we will fold the sheet. 
Carefully fold the sheet and cut along line B. 
After you cut it off, you have such a triangle in your hands. Fold it in half exactly. 
Now we divide the resulting triangle with two lines into three more triangles. You can fold on the "eye", but it is better to use a ruler. 
Let's wrap one side first. Then another. 
Here's what happened in the end. You need to cut off the bottom part to get an even source for cutting out the snowflake. 
Well, now you can start cutting out the snowflake the way you want. The top of the triangle will be the middle of the snowflake. For now, try and fantasize without templates. You can cut whatever comes to your mind. 
Here's what I got as a result of my first experiments. 
The cut out snowflake is not yet very ready, as the fold lines are clearly visible. To avoid this, you need to straighten these lines with an iron. 
Now your snowflake is even, beautiful and completely ready. Do not be afraid to experiment and you will definitely succeed.
Stencils (templates) of snowflakes for printing
Below I attach a large selection of stencils for printing on a printer. You will need to save the picture to your computer, and then print the image you like on the printer. It will also be possible to simply circle the image with a pencil by attaching a piece of paper to the screen. 
Pictures of Christmas snowflakes for printing
Here is another large selection of snowflake stencils that can also be glued to windows. In order to cut a snowflake according to these stencils, you also need to save and print any picture. Then fold the printed image in half and cut out the snowflake along the contour. If you want to involve children in this business, then it is better to choose simpler schemes so that the kids will definitely succeed.
Volumetric window decorations for the New Year 2019
You can also decorate your windows with beautiful volumetric snowflakes. It will not be difficult to do this if you follow our detailed instructions. I propose to make just such a beautiful two-tone winter beauty. To do this, you will need two sheets of colored paper, scissors and glue. 
And so we take the first blue sheet and make an even square out of it. We bend it as shown in the photo below. 
Next, cut off the unwanted part. 
The resulting triangle is bent in the middle. 
We do everything exactly as if the edges are not even, the snowflake will not turn out beautiful. 
This is what it looks like from the top. 
Pick up the upper part of the common fold with your fingers and connect to the side where there are three folds. You should get a triangle with a long acute angle. 
Trim the folded triangle at an angle to the right. Here is what should happen in the end. 
Now we take the workpiece in our hands so that we have the fold line on the left, and the side with three additions on the right. 
And we make very thin cuts from the addition side. The thinner the cuts, the fluffier the snowflake will turn out.
We make cuts almost to the very end to get such a blank of the second level. 
Carefully unfold the workpiece. And look how beautiful we have already turned out, but this is not the end. 
Now you need to take a white sheet of paper, bend it into a triangle with sides of 15 cm, since the first snowflake was cut out of a triangle with sides of 20 cm. 
Just like we cut out the first snowflake, we cut out the second one. We also bend the square into a triangle. 
And we make the same small incisions. 
After we unfold the blank, we already have two snowflakes of different colors in front of us. 
It remains to make one more blue snowflake, but with sides of a triangle of 10 cm. 
As a result, when we have three snowflakes of different sizes. From which it will be possible to collect one beautiful and voluminous snowflake. 
The second can be done with a different alternation of colors.
As you can see, making such a snowflake is not at all difficult. I think that even a child will cope with such a task.
Video on how to make voluminous snowflakes to decorate windows
You can try to make such decorations for the New Year's interior. The video describes in detail step by step how beautiful voluminous snowflakes are made.
Click Class
Tell VK
Until the mood appears, we will not feel the onset of the most magical holiday. How to get this mood? Start preparing an apartment or house for a celebration: do it with children on a winter theme, look at decor information and stick openwork snowflakes on the windows.
There are craftsmen who have just folded a piece of paper and already see or draw an ornament on it, along the contour of which the product will be cut. I think that this does not require a hefty fantasy. We will do it easier and take the templates and diagrams that I will show in this article as the basis for snowflakes.
There are very difficult options for cutting, I didn’t even consider them, because it’s simply impossible to cut a sheet folded four or five times. Therefore, we take simpler schemes.
Of course, these can be taken as a basis, and not only paper, but also plywood, felt or cardboard can be used. But it is easier for your child to cut out such an ornament from an album sheet or sheets for a copier.
On the diagrams, the white part is cut off.
The paper is folded three times, then 6 corners are obtained.
For those who transfer the pattern by hand, there is a whole selection of all kinds of patterns.
Or here are some options.
You can experiment and take not the already familiar white color, but buy blue, blue, red and yellow shades.
And craftsmen stick such beauty not only on windows or walls, but also make a real decor element using beautiful ribbons and a photo frame, as in the photo below.
Interesting idea, right?
Patterns for cutting paper snowflakes
If you want to get a better look at the diagram, then you can zoom in on the monitor and only then circle it.
I have long noticed that a snowflake looks prettier if it has a little cut off the tip. Available in the shape of a heart, circle, rhombus or triangle.
If you cut the center at an angle, you get an asterisk in the middle.
Or like here.
Curls give delicacy to the finished version.
Use animal shapes, such as cats.
Or the shape of stars, Christmas trees.
Very easy to cut pattern.
This pattern can be cut even by a small child.
Petals and rounded shapes will make the snowflake more rounded and full.
It is better to take a larger sheet of paper, then the lines will be thicker, and the pattern will look better.
Use well-known openwork shapes: heart, rhombus, curl.
Templates for cutting paper snowflakes for windows that can be printed
Here are a couple of interesting templates that are easy to print on the printer. Cut along the outline and attach to a folded sheet of paper to circle.
Most often, a sheet of paper is folded three or four times. And the more folding, the more delicate and fluffy the snowflake turns out, but it becomes more difficult to cut it.
The gray part is cut out here.
On the windows, my child and I glue paper figures and winter applications for toothpaste. Sticks well and washes off quickly.
Interesting options with the silhouettes of the Olaf snowman from the cartoon and the deer.
Another selection of beautiful patterns.
To cut out small details, use a clerical knife or blade.
Sharp corners look very nice.
You can make a completely round snowflake.
You will want to take a closer look at the snowflake with silhouettes of butterflies and flowers.
Do not try to stick them on PVA glue! It is very difficult to clean it from glass, sometimes you even have to scrape it off the glass, which leaves scratches on it. I have a couple of friends who thought of doing this. They were tormented in the spring to wash off the consequences.
Or you can take as a basis self-adhesive colored paper, it is sold in many stationery stores. It is quite dense and easily comes off the surface.
Paper snowflakes: cutting templates
I really like it when walking in the courtyard on a winter evening, you see interesting combinations of snowflakes and figurines of New Year's characters on the neighbors' windows. A festive mood and a desire to invent and make something with your own hands are created. And not just buy something ready in the store. Nevertheless, in creativity we are realized.
And how happy the kids are! Our process was structured like this: I fold a sheet of paper and draw a pattern on it, the child cuts it out and, together with dad or grandmother, go to glue it on the window. Adults control the observance of the composition on the window and the consumption of toothpaste, and the child is fully responsible for the gluing process. In general, everyone is involved, the mood also appears in everyone.
You can use all of these patterns to decorate and wrap gifts.
To create a harmonious composition on the window, it is better to glue the largest snowflakes on top along the perimeter of the upper sash, and reduce the diameter of the decor to the bottom, so it will turn out interesting and tasteful.
Alternatively, you can glue them around the entire perimeter of the window without touching its middle. This pattern is often used on scarves. It turns out like a wreath, only at the edges there are large snowflakes, and towards the center they become smaller.
tweet
Tell VK
Hello dear friends! Today I will show you how to cut simple and beautiful paper snowflakes to decorate your windows. After all, when the first fluffy snow falls, some kind of magical feeling of expectation of something fabulous immediately sets in.
The first snowflakes are the harbingers of the upcoming New Year, to which we in Russia have a particularly reverent attitude. Many begin to prepare for this holiday already in advance, almost in November. Because it is a whole ritual that lifts the mood.
They put up Christmas trees, decorate their space with various garlands and tinsel. They also make simple paper decorations, as it is the most versatile tool at hand for various crafts.
Both adults and children are captivated and carried away by such an action, including me. But imagination is not enough and it always turns out some kind of rubbish instead of beautiful patterns. And to help you and myself, I have prepared templates and patterns for cutting and decorating windows.
For such crafts, it is best to take thin material. And then, for example, it is inconvenient to cut out of printer paper. At home with children, it is more interesting to make snowflakes from colored or foil.
Let's start by warming up with simpler patterns that even children can cut out. First you need to make the workpiece itself, with which you can already work further.
Take a colored or plain white sheet of landscape paper (A4) and cut a square out of it with scissors. It's easy - make a corner and cut off the excess. Then do everything according to the diagram below.
Now you can work on this. We turn on the fantasy and draw a contour on the workpiece along which you will cut out your beauty. And then, along the contour lines, cut off the excess with scissors and you will get the first snowflake. I'm posting the idea below.
I already wrote that my imagination is bad, but while I was selecting material for you, I decided to experiment what would come out of me. I took a regular sheet of office paper, made a blank, as described above. And then with a pen, looking at the top drawing, she came up with her own. Although, in all honesty, I just scrawled triangles and rectangles. And here's what happened, look. In my opinion, quite an attractive snowflake.
Of course, she did it in a hurry. Just pure try. I don't think it's bad for a first time. Incredibly proud of myself. Now you can improve for the New Year. You look and I can make the same beauty on my windows.
In the meantime, I cut out, made several conclusions: it is better to draw a template with a finely sharpened pencil. And scissors should be with thin blades.
And here, perhaps, I will give you some ideas for templates. Although, as it turned out by a practical method, it is very easy and simple to come up with and make a beautiful snowflake even for people with a lack of imagination or creative thinking.
How to make paper snowflakes with your own hands easily and beautifully (step by step instructions)
Since I only had printer paper or a thin napkin, I continued to make snowflakes according to a template from the Internet on it. With a napkin, I didn’t get it right right away. While drawing a template on it, it was torn from the handle. And my scissors are not that sharp. Therefore, the spoiled napkin immediately flew into the wastebasket.
And so, I found such a suitable simple template:
Here, by the way, the triangle is folded a little differently. But I used the blank, which I made according to the very first template. It probably doesn't matter anymore. I took the same pen and tried to copy this drawing on my future snowflake.
It turned out, though not one to one, but very similar. Well, let it go. I just want to show that even for a creative nerd like me, it's not that hard. I took my bulky scissors and started cutting. Not everywhere it turned out to cut exactly along the contour, but in the end, I overcame this stage as well. I unfolded the paper and realized that it turned out almost the same as in the picture.
Let's continue. I take the next template, redraw it, work with scissors and see the result. I understand that every time it gets better and better. Rate it.
The cutting process itself takes no more than 5 minutes. And to make everything clearer for you, I found a suitable video. Take a look and you'll see for yourself how easy it is.
Beautiful paper snowflakes for windows with patterns for cutting
And what did I want to say with all this. Yes, it is very easy to cut beauty on paper windows. Even a beginner or a child will cope. Even if you have at hand not very comfortable material (too dense) and inappropriate scissors. But if you have both normal craft paper and normal, sharp, thin-bladed scissors, then it will be much easier for you.
If fantasy fails you, then just look at the diagrams that I will show you and copy them onto your blanks. And most importantly, do not be afraid if it does not quite look like. Your snowflakes will still be beautiful and unique.
Option number 1
Option number 2
Option number 3
Option number 4
Now, I think you just need to stock up on scissors and paper. Then turn on your imagination or use the proposed schemes and begin the process of decorating your windows. This one is very exciting, let me tell you.
How to stick snowflakes on a window?
And so you cut out our beauty, now you need to glue them on the windows. How to do this, I'll tell you now. There are several options and here are the most common:
- Water - suitable for thin material, but there is a risk that paper crafts may wrinkle or fall off after drying.
- Milk is a good water substitute. Pour it into a wide dish, dip a snowflake into it and quickly but carefully attach it to the glass.
- Soap solution - shave the laundry soap and pour boiling water over the chips, stirring until they dissolve. Then apply the solution to the products with a brush, sponge or sponge.
- Paste - Pour water into a saucepan, put on fire and bring to a boil. Then gradually add flour to the water and mix so that there are no lumps. A fairly thick consistency should be achieved.
- Toothpaste - I like this method. Apply it a little on the product and attach it to the window. When you remove the snowflakes, the paste will be easily washed off.
- Glue - You can use any PVA glue or glue stick. By the way, there is a water-soluble glue. In with him it would be better, easier to wash off later.
Now you know how to beautifully cut and stick paper snowflakes on your windows for the New Year. It's not difficult at all. And the process itself is so captivating that it is impossible to stop. You can insert products of different sizes and create a pattern from them. The main thing is to have enough imagination. But, I believe in you!
On the eve of the New Year holidays, everyone wants that the house was extraordinarily beautiful, cozy and fabulous. Therefore, it's time to think about what you can do to achieve your desired goal. A good option for decorating a room before the New Year holidays is to decorate windows with unusual drawings, festive motifs that will bring pre-holiday mood and a New Year's fairy tale to the usual room decor.
And there is no need to think that all home decorations can only be purchased in a store, while spending a fairly impressive amount of money. It would be much better, having united with the whole family, to make a variety of decorations for the house and the Christmas tree on their own. For such an activity, you can allocate a certain day, for example, when it is planned to install a New Year's beautiful spruce. And do not forget that this is the most exciting activity!
The easiest thing you can do with your own hands is to cut and attach snowflakes in different places. Everyone remembers how, as a child, they cut them out before the holidays in the garden. Today, becoming parents, you can spend time with your child with benefit and pleasure, cutting out beautiful snow-white snowflakes from paper with your own hands. Kids are always happy to take part in such events.
Teaching a child to cut a snowflake yourself is not at all difficult. To do this, prepare the necessary tools and paper. As a basis, you can take napkins, colored paper or just a white sheet from the album.
The thickness of the sheet does not really matter. But you need to know that the most delicate and airy snowflakes are obtained from thin sheets. And too thick paper will be difficult to cut.
You will also need a pencil and sharp scissors. After the pattern for the future snowflake is selected, the paper is folded, as shown in the photo. The more additions you make, the more interesting and openwork the snowflake will turn out.
The size of the future decoration depends on how large the sheet is initially selected. In this case, only the desire to have a large or small snowflake influences the choice.
When the drawing is applied to paper, we proceed to cutting. This process requires special care and accuracy. In no case should you cut off the edges of the paper at the folds, as the snowflake may simply fall apart.
Children really like this process. Indeed, in the end you will get beauty with your own hands, which is so nice to decorate a Christmas tree, windows or walls in a room.
It should be noted that, it would seem, such a simple activity as cutting snowflakes out of paper with your own hands is a great opportunity to develop a child's imagination, a sense of beauty and artistic taste.
It is possible and necessary to develop the abilities of your child at home, but a variety of circles in the garden, school will only help to raise the level and hone the talents of the child.
In addition to simple paper cutting, a child can be interested in making volumetric models of snowflakes. These decorations are designed for older children and adults. But that doesn't make them any less interesting or beautiful.
All the same openwork paper snowflakes are taken as the basis, the pattern is transferred, for example, to polystyrene or polystyrene foam. With the help of a sharp knife, all the necessary elements are cut out, and as a result, unusually beautiful, voluminous snowflakes are obtained.
They can be left white, but if you connect the kids and paint them together with bright colors, then such decor elements will simply amaze with their unusual design. And the time spent creating them will bring all family members together. The result of your labors will be unique.
Do-it-yourself voluminous paper snowflakes
In this master class, we will make such a heart with a snowflake. It can be used as a bag for a small gift or just as a Christmas decoration with your own hands.
First you need to print this diagram.
We transfer the scheme to paper and cut it out.
The result is two identical blanks.
To fasten together, we make cuts - on the one hand, from the top to half of the snowflake, on the other, from the bottom to half of the snowflake.
We collect the finished volumetric snowflake, threading each other.
Attach the handle.
Do-it-yourself voluminous paper snowflake is ready!
How to make a DIY 3-D snowflake
Modern technology has also reached such a seemingly simple task as creating a snowflake. As the name implies, 3-D snowflakes are a more complex, but very effective technique, due to which the made decor is distinguished by a special elegance of lines and rather unusual shapes.
What may be needed to make a snowflake with a 3D effect?
Prepare a square sheet of paper of the desired color, a pencil and a ruler, scissors or a sharp paper knife, glue. The work of making 3-D snowflakes is very painstaking and requires a lot of patience.
The first step is to draw a sheet of paper into squares. We need 6 identical squares. Then such a scheme is applied. It can be printed.
Fold the square in half diagonally, transfer the diagram as shown in the figure. Fold in half again.
The next step is cutting parallel lines. The incisions must be made in such a way that they are directed towards each other, but do not converge to the end.
We connect and glue the corners of the first small square.
Then turn over and glue the corners of the next square.
And so on in order, until all the corners are glued together.
To make the snowflake voluminous, you need to very carefully glue the corners of all the squares. As a result, six snowflakes are obtained, which, gluing together, form a three-dimensional 3-D figure.
We connect the corners of all the blanks to each other.
In order for the figure to keep its shape and not fall apart, you need to additionally glue the sides of the snowflake.
That's all, our 3-D paper snowflake is ready!
By inventing various patterns, painting the figure with paints and even decorating with beads, you can not only create a very beautiful New Year's decoration, but also help develop your child's imagination and sense of style.
Paper snowflakes - kirigami instructions
Snowflake kirigami is a fairly easy way to quickly and effortlessly make a lot of beautiful decorations. The highlight of this type of snowflake is the selection of paper. For snowflakes - kirigami you need bright colored paper.
It can be colored on one side only, but you can choose paper with rich colors on both sides.
We take an A4 sheet and fold it as shown in the photo.
Cut out a square, fold in half diagonally.
We fold two more times.
Then we print and transfer just such a scheme to the finished workpiece.
The next step is to cut patterns on the workpiece using nail scissors.
Carefully cut out the snowflake and unfold it.
Bend the resulting corners, as in the photo.
A snowflake can be decorated with stasas, beads, Christmas tinsel, and then it will become the central decoration of your New Year's home.
2 more do-it-yourself kirigami snowflake options:
The light, airy figure of a ballerina is very beautiful. If you combine two types of a beautiful snowflake and a ballerina figurine together, the effect can exceed all expectations.
It takes a lot of time to make this type of jewelry. But the work of cutting it out is quite simple, even a child can handle it. Not single figures look very impressive, but a whole garland of graceful ballerinas.
What you need to prepare for work:
- dancing ballerina figure template;
- thin white paper for a ballerina's tutu. Paper multilayer napkins are very well suited;
- thin white cardboard;
- scissors.
Choose a ballerina figurine template. In the Internet, you can find a large number of options. Simply copy the selected template into a text document, format and print. But it is much more interesting to draw a sketch yourself. Transfer the template to cardboard and cut it out.
It is very important that the cardboard is white on both sides, since the snowflake is voluminous and is clearly visible from any side. The size of the figurine is optional. There are no restrictions in this matter.