Hello!
When the question arose of purchasing a new mattress, in the salon I was offered to take a cover for it. I remember what kind of mattress fabric comes to without a cover - scuffs, stains and stains of all possible types - I decided not to save on this accessory and agree.
Cover from the manufacturer Askona "Protect-a-bed Terry" 140*200 cm cost 2887 rubles. Suitable for mattress height up to 40 cm.
Sold in a plastic case with a zipper, a cardboard tab helps to keep the shape.
Main characteristics:
- Waterproof case, good breathability
- Protection against dust mites and allergies
- Maintains a comfortable body temperature
- Cotton terry surface
Composition:
Manufacturer information:
Appearance:
The fabric is white, the side parts are made of a stretchy translucent fabric, framed with an elastic band around the entire perimeter.
Central part: on the front side, a thin terry coating with a small pile
on the inside, the fabric resembles a thin oilcloth
The cover sits tightly on the mattress. An unexpected plus for me was that due to the terry coating, the bed linen absolutely does not slip on the surface of the mattress (on an uncoated mattress, the sheet usually rolled down in the morning)
It is surprisingly easy to put on, it can easily be done by one person.
This is what the reverse side looks like
There is no discomfort, no feeling of heat - from which we can conclude that the surface is really well breathable.
Stain protection:
I had to wash the cover two months after purchase. I apologize for the intimate details, but this is an important point for the review: the fact is that during menstruation it happened that a little blood leaked onto the sheet, and as a result, the cover was also soiled. When I took the cover off the mattress, to my relief, there was not a single stain on the mattress itself!
I washed the stain with laundry soap and washed it in the machine at 40 degrees. The cover is white again and looks like new. So the water resistance is also tested in practice.
Many thanks to everyone who came, I hope my review was useful!
__________________________________________________________________
The mattress pad should be cleaned at least once every 3-6 months.
Is it possible to wash a waterproof or lambswool mattress cover, and if so, how?
The answer depends on what material the bedding is made of and what filler is inside. After all, there are covers that, when in contact with water, lose their protective properties.
Before cleaning or washing the product, study the information on the label or instructions. It is important to follow these instructions because the manufacturer has done tests and trials, so he knows how the fabric will behave under certain conditions.
The top trim is often sewn from cotton, microfiber, bamboo.
Microfiber is one of the most durable fabrics. It can withstand temperatures up to 60 °C, if necessary, boil down to 95 °C. For washing use of powder detergents is allowed.
Mattress covers made of cotton fabrics are dangerous because they can shrink. Therefore, the optimum temperature for them is up to 40 ° C. Washing can be either hand or machine. Bamboo fiber needs more gentle care. Textiles are washed at temperatures up to 40 ° C, bleaches are not allowed in SMS, machine drying is prohibited. Ironing such linen is prohibited.
They clean the covers at least once every 3-6 months, and in between they clean them with a vacuum cleaner, beat them out, and ventilate them. Dry mattress toppers in the fresh air straightened, in a horizontal position.
Waterproof
It is recommended to wash at 30-40 degrees in a gentle mode. Such a mattress pad protects the mattress even from the penetration of liquids, odors, the penetration of pathogens, mites. These models use a moisture resistant membrane.
Membrane fabric needs regular washing, otherwise the dirt that gets into the "pores" clogs them - almost the same thing happens as with human skin. Sweat aggressively affects the material, destroys the texture, and leads to the loss of membrane properties. Often waterproof models are laid in the bed of patients and children, so the issue of washing is acute.
Here are the main "taboos" for the membrane:
- powder and other crystalline SMS, which clog the pores of the fabric;
- boiling and temperature above 40 °C;
- means with chlorine and its derivatives;
- spin;
- drying on the battery;
- ironing;
- fabric softeners, fabric softeners, stain removers;
- chemical cleaning.
The optimal washing mode is hand or delicate in the machine at 30-40 ° C. Detergents take liquid. If a stain appears, then it is washed with soap, since shampoos do not always cope with severe pollution.
Wring out the mattress cover by hand, do not twist. High temperatures are prohibited, so the product is dried in the fresh air, but protected from direct sunlight. Periodically treat the surface with impregnations that envelop the fibers and restore water resistance.
From sheep and camel wool
Wool products stay clean for a long time. Remove light soiling with a sponge moistened with wool detergent diluted with water (30 °C). Hand and machine washable up to 30°C. In the latter case, select the mode "for wool". Products during push-ups are not twisted, but only pressed on both sides of the straightened cover. Use SMS for wool, with lanolin in the composition. Dry in a horizontal position. If the mattress pad is very dirty, resort to professional dry cleaning.
Down and feather
Products with down and feathers are also washed in the machine, but if the drum allows you to load more than 7 kg. Set a gentle mode and pour liquid detergents without bleach into the container. Air conditioning is prohibited. A medium intensity spin is recommended.
With coconut, latex, polyurethane filler
Mattress covers with coconut filling cannot be washed. The filler in such products cannot be washed, since all valuable properties are lost, especially when it comes to coconut coir. Wash covers only. Care instructions depend on the fabric from which they are sewn and are indicated on the label. Some care recommendations are also described in this material.
With holofiber
Holofiber is an artificial hollow fabric that is used in outerwear and when sewing bedding, including mattress covers. When choosing a temperature regime, you should focus on the material with which the insulation is connected. Its fibers withstand high temperatures and at the same time do not collapse, do not “run away”. The maximum spin mode is also possible, since the filler does not change shape and does not stray. Also, artificial fiber is not sensitive to stain removers, solvents, detergents.
Askona
Ascona mattress covers are presented in several models:
- knitted with polyester fiber;
- knitwear, foam, coconut, holofiber;
- jersey, pencil case, latex, holofiber.
Basic care information is listed above. However, these models used knitwear. Knitwear requires a delicate attitude, otherwise they stretch. Therefore, they are also washed in a gentle mode, mild detergents are added to the water (up to 40 ° C). Horizontal drying shown.
Protect a bed is Askona products. The peculiarity of this waterproof cover is that it is wear-resistant, withstands 200 washing cycles. The permitted water temperature for machine and hand washing is up to 50 ° C, drying at medium temperatures is allowed.
Ormatek
In addition to the materials mentioned above, jacquard satin is used in Ormatek mattress covers. In order not to damage the fabric, it is prohibited:
Hand wash or machine wash on delicate cycle shown. Use gentle detergents. To keep the pattern on the fabric, buttons and zippers are fastened.
In order not to get lost in the information given, you should remember the following rules:
- Before choosing the type of washing or cleaning, pay attention to the care label.
- If there is no label or instructions, then they are guided by the most delicate material used in sewing. So, if the mattress pad is trimmed with microfiber, but lined with camel hair, then they are guided by the rules for washing wool.
Watch the video: how to wash a mattress cover.
A mattress topper is a useful item to have in your home. Often it comes with a mattress, but if necessary, it can be purchased at any hardware store. After all, it protects the surface of the mattress from various contaminants and stains.
Many are wondering can the mattress cover be washed?
The answer is simple: it is possible and even necessary.
It should be washed at least once every two to three months. But first you need to figure out how to wash the mattress pad correctly.
How to wash a mattress pad? In order to find out how to wash this product, you need to understand what fabric it is made of.
There are the following types of mattress covers:
- cotton;
- synthetically;
- polyurethane;
- woolen.
Each mattress pad has a label with information about the required washing mode, dyeing ability and ironing temperature.
If the mattress cover is made of polyurethane, then the washing temperature can reach 90 degrees. It is in such conditions that microorganisms harmful to humans die.
You need to understand that the cover from improper washing can sit down and become unusable, especially if it is on an elastic band. Such a product will be almost impossible to pull on the mattress. Therefore, you must carefully read the information on the label before putting the mattress pad in the washing machine.
Washing the cover is not difficult, but there are always certain tricks.
Synthetic or cotton types of products can be washed more often than others.
They tolerate this procedure well, without changing the shape and quality of the surface.
The cover from the baby mattress should be washed with a special baby powder so as not to cause an allergic reaction in the child.
The question arises, how to wash a mattress cover if it is made of wool, and is it generally possible to wash a cover made of such a fiber?
Since wool requires special care, it is better to take such models of covers to dry cleaning. And in the absence of severe contamination, the dry cleaning method will be used.
It is the safest for this type of fabric.
If you decide to wash the cover, then it is better to do it on the “wool” or “delicate wash” mode. In this case, the temperature should not exceed 30 degrees.
Special products containing lanolin will help to clean the dirt from such a product. It will protect the woolen case from mechanical damage during washing, and will also give them elasticity and softness.
Having dealt with the question of how to wash the cover, it follows the question - how to dry it properly?
If there is a filler in the mattress cover, then it must be spread evenly during the drying period, otherwise it will gather into one big lump and the product will become unusable.
The woolen case should not be wringed or twisted during drying. Excess moisture should be disposed of with longitudinal movements. Drying of the product is carried out only in a horizontal position.
Mattress toppers without filling can be gently ironed.
And models with fillers are strictly prohibited from ironing. It may melt or shrink in size.
Removable mattress toppers allow you to keep the mattress clean for as long as possible, to prevent the formation of stains. But they also need to be washed regularly, taking into account the features of the cover, membrane and filler. Many buyers argue: “Is it possible to wash a mattress pad in a washing machine?” It's time to find out.
Mattress cover Fleece Bamboo
Basic Rules
Save the mattress pad tag. On it you will find all the necessary information about washing. In case of loss, contact the global Internet network. If the product was previously purchased at a popular Ikea store, you will find detailed information on caring for it without any problems.
In the absence of information, focus on materials and gentle washing conditions.
Please note that usually the outer case is made of materials such as:
- Cotton fabric. (Temperature regime - 40 degrees, washing by hand or mechanically is acceptable);
- Bamboo fiber. (Same water temperature, mechanical drying, ironing and bleaching are prohibited)
- Microfiber (Suitable 60 degrees).
Waterproof cases
Membrane material needs special care.
You can wash a waterproof cover, but it is unacceptable:
- Washing at over 40°C
- Whitening with special means.
- Mechanical or manual extraction.
- Drying under the sun.
- The use of excipients.
- Chemical cleaning.
If you have determined that the design includes a water-repellent membrane, in the future it can only be washed in the washing machine, on a delicate cycle. You can use gels or shampoos - these are non-aggressive substances that will help get rid of dirt on the case.
Waterproof Mattress Protect Simple
After washing, drying follows. The mattress cover can be spread along the entire length. After complete drying, the surface can be treated with various means. This will restore the original quality of the goods.
Varieties of covers
If the mattress cover contains fillers - fluff or feathers, you can wash it in a washing machine, but it must withstand at least 7 kg of dried laundry. Do not use bleach or conditioner.
Caring for a mattress pad made of different wool is not more difficult. It is enough to wipe it with a brush dipped in water beforehand, and add a few drops of detergent for a washing machine. After that, it can be cleaned in a washing machine, with the “wool” mode and a water temperature of at least 30 ° C, but the spin should be at medium speed.
Holofiber or polyester fibers are often used by manufacturers. They have similar characteristics and are able to withstand washing at high temperatures, but not spinning at high speeds. Also, do not use aggressive substances.
Popular firms
The two most popular companies are Askona and Ormatek. They specialize in one product. Ascona mattress toppers are made of cotton fabric. Simple technology and proper care allows the cover to last as long as possible in an attractive form. Ascona products can be washed in a moderate mode with a water temperature of no more than 40 degrees.
The company Ormatek often uses the material "Jacquard - satin". His washing rules are slightly different from the rules attributed to the Ascona company:
- The product should occupy only half of the drum.
- The use of aggressive substances is prohibited.
- Turn on delicate mode.
- The water temperature should not exceed 30°C.
- You can iron the mattress cover from any side.
The purchased cover needs to be cleaned or ventilated. Washing should not be frequent, once every six months is enough. It can only be dried in a straightened form and in the fresh air, but try to avoid direct sunlight.
All mattress covers are hand or machine washable. Before starting, it is important to carefully study the recommendations that the manufacturer indicates in graphical form on a special tag. The main requirements are reduced to a complete rejection of spinning and the use of the lowest possible temperature, not exceeding 40 degrees. It is possible to use powders that are used for everyday things. After washing, the product is given the most correct appearance and dried horizontally.
Before washing a mattress cover made of any fabric, carefully study the washing requirements for this product, proposed by the manufacturer.
What types of mattress covers are machine washable
Mattress covers made of any material are suitable for washing, even waterproof or waterproof fabrics. The main types of mattress covers:
List of the most popular manufacturers:
- Anderssen
- Askona
- Ellipsebed
- Geneva
- Kondor
- Perrino
- Professor
- Protect-A-Bed
- Sleep&Fly
- Mattress
- Protect
- bed & bed
Before starting, you must carefully study the manufacturer's recommendations, which he. For each product, you need to choose such a washing mode and temperature at which the washing powder will remove all impurities and at the same time will not cause any harm to the color and structure of the fabric.
What temperature to choose
When washing the cover, the temperature should be the same throughout the procedure.
When choosing a program for delicate items, the lowest possible temperature is automatically set - from 30 to 40 degrees. Otherwise, this temperature is set manually. It should be constant throughout the wash.
Spin
If there is no program selection, then it is necessary to turn off the spin completely and set the minimum washing time. Excessive spinning speed can irreversibly deform the cover from the Ascona orthopedic mattress and other types of covers.
How to dry a mattress cover
With the complete absence of spinning in manual and automatic washing, the mattress cover remains completely saturated with moisture. It must be properly dried so that it does not have time to ban and is not deformed. To do this, give it the most correct shape and place it completely on a horizontal surface. For good drying, ensure good air circulation so that evaporated moisture does not linger in the room.
The best measures are preventive. If you do not allow the cover to become dirty, then you will not often have to wash it. To do this, mattress toppers are usually covered with bed linen on top, which serves as a barrier to major contaminants, including dust. Get rid of the habit of eating or drinking in bed to keep crumbs and liquid from getting on your bed sheets.
The manufacturer of each product provides recommendations for the care of their product. It is usually sufficient to ventilate a mattress pad from Ascona and other manufacturers several times a year, vacuum it periodically and remove minor dirt.
Below is a video that shows washing a mattress cover in a washing machine.
Larisa, November 30, 2018.