- Nadezhda's work.

Description and diagrams are taken from the book Crochet Flowers. A cactus consists of a trunk and two separate shoots.

Knitted primrose flowers in pots - Irina's work.

To knit primroses I used a 1.5 crochet hook, Bebe alize thread for the flowers and the pot, and yarn art angora de luxe for the leaves. The consumption is very small.

You can watch a master class on knitting daisies.

Daffodils. One of my first works. I’ve been knitting recently, about the second month. I really like the knitting process itself. I take the diagrams from the Internet.

Author Olga. Flowers and leaves are knitted from “KARTOPU” acrylic yarn, and the pot is made from wool blend yarn.
Hook No. 1.75, product weight 230 g. I used: 200g yarn, 90cm wire, padding polyester. Flowers 7 pcs., leaves 11 pcs., bouquet height 28.5 cm.

Flowers, leaves and a pot are knitted from wool blend yarn.
Hook No. 1.75. Product weight 230 g. Used: 200g yarn, 90cm wire. Sintepon. Height 27 cm.

Use a tied plastic bottle as a vase. I did not glue the middle of the flower, but sewed it on. It is better not to starch the flowers, but to moisten them in sugar syrup and shape them while they are wet. First wrap the wire with thin yarn, then bend the end of the wire using pliers. Then glue the flower to the wire.

You will need: for pots - leftover yarn of pink colors, as well as white mohair and black or gray wool mixture (the yarn should not be thin); for cacti - green yarn; for flowers - pink and yellow melange; hook No. 3; molds for pots (for example: plastic containers for dessert).

Dimensions: small flowerpot: height 9.5 cm, diameter 11 cm; larger pots: height 11 cm, diameter 125 cm.

Material consumption:

Yarn "Toccata fino" (170 m / 50 g): 50 g each of white, yellow and orange
. Hook No. 2.5
. 1 small flowerpot
. 2 larger pots

Main pattern: st. s/n, with the 1st tbsp. s/n in each circle replace 3 vp. and close each circle with 1 st. b/n in the 3rd initial v.p.
Lace borders A and B: knit according to patterns A and B. Each time start with a st before the rapport, repeat the repeat, finish the st after the rapport.
Edging: 2 ch. instead of 1st tbsp. b/n, skip 1 p., 2 tbsp. s/n, 3 tbsp. with two double crochets and 2 tbsp. s/n in the next paragraph, 1 and. skip * 1 tbsp. b/i in the next paragraph, 2 tbsp. s/n, 3 tbsp. with two double crochets and 2 tbsp. s/n in the next p., skip 1 p., repeat from *, complete the circles with 1 n/st. b/n in the second initial v.p.

Small white planter

Cast on 8 vp, close 1 p/st into a ring. b/n.
1st round: work 3 ch. instead of 1st tbsp. s/n, then knit another 15 sts in a circle. s/n, finish 1 p/st. b/n in the third initial v.p. - 16 p.
2nd round: 2 tbsp. s/n in each st. s/n persons. circle = 32 tbsp. s/n.
3rd circle: 1 tbsp. s/n in each st. persons circle, while in every 2nd st. s/n knit 2 tbsp. s/n = 48 tbsp. s/n. 4th circle: like the 3rd circle, but in every 3rd st. s/n knit 2 tbsp. s/n = 64 tbsp. s/n.
5th circle: around each st. s/n persons. circle, tie 1 relief st. s/n from the inside out to the face.
6th circle: 1 tbsp. s/n in each st. s/n persons. circle.
7th circle: 1 tbsp. s/n in every st. s/n persons. circle, while in every 16th st. s/n knit 2 tbsp. s/n = 68 p. 8th round: knit as 6th round.
Rounds 9-13: knit lace border according to pattern A.
14-17th circles: 1 tbsp. s/n in each st. s/n persons. circle.
18th circle: turn the work and tie the edging from the inside.

Large yellow flowerpot

Until the 5th round, knit like a little one.
6th circle: 1 tbsp. s/n in each st. s/n persons. circle, while in every 8th st. s/n knit 2 tbsp. s/n = 72 tbsp. s/n.
7th circle: 1 tbsp. s/n in each st. s/n persons. circle, while in every 9th art. s/n knit 2 tbsp. s/n = 80 tbsp. s/n.
8th and 9th circles: 1 tbsp. s/n in each st. persons circle.
10-13th circles: knit a lace border in accordance with the 9-12th rows of diagram A.
14-18th circles: 1 tbsp. s/n in each st. s/n persons. R. 19th round: knit the edging as for a small flowerpot.

Large orange flowerpot

Until the 7th round, knit like a large yellow flowerpot.
Rounds 8-17: knit lace border according to pattern B.
18th and 19th circles: 1 tbsp. s/n in each st. s/n persons. circle.
20th round: knit the edging as for a small flowerpot. For all pots, tie along a chain chain, which should be 20 cm longer than the upper perimeter of the pot. Thread the lace through the last circle of st. s/n and tie with a bow.

DIY crafts: crocheted flower pots. Description and knitting patterns for free

An openwork flower pot is crocheted from white cotton yarn. The pots are decorated with a decorative ribbon of flowers.

Dimensions: height - 5.5 cm, base diameter - 5.5 cm

You will need: 35 cm of fine white cotton yarn;

Hook corresponding to the thickness of the thread;

Abbreviations used:

V. p. - air loop;

Conn. Art. - connecting column;

RLS - single crochet;

C1H - double crochet;

С2Н - double crochet stitch

Knitting density: 1-4 r. = 5.5 cm

Description of knitting

Crochet a chain of 10 sts. p. and knit from the 1st to the 12th r. according to the scheme. The rows end with the connection. Art., with the exception of the 5th r., in which to finish the 1st century. p. and 1 sc in the 4th of the five initial sts. n., and the 6th and 7th r., in which the last 4 v. p. replace 1 C2H in the 1st RLS at the end of the 6th row. and in C2H at the end of the 7th r.

For each handle, tie a chain of 60 chains. p. and knit sc. Knit 2 handles. Starch the pots and put them on the pot, also starch the handles, give them the desired shape by bending the ends and leave them to dry. Glue the handles to the pots from the outside. Through the holes of the 9th r. thread decorative ribbon.

DIY crafts: crocheted flowerpot. Description + diagrams

The flower pot is crocheted from cotton yarn. You will need: 30g Escocia yarn No. 10 (100% cotton) cream color; Hook No. 1.5 Knitting density: 1-2 r. = 3.5 cm. Abbreviations used: V. p. - air loop; RLS - single crochet; С1Н - double crochet

Description of knitting

Crochet a chain of 8 sts. p., close it in a ring and then knit according to the pattern from the 1st to the 11th r. From 5th to 11th r. knit as follows: 4 C1H, wrap them with thread and knit another 1 C1H 12-14th row: 120 C1H 15th row: 120 RLS For the loop after the 15th row. tie a chain from c. p. 4 cm long, attach it to the 11th r. from the outside of the flowerpot and tie a sc, as shown in the diagram. Knit another loop on the opposite side. Make a cord 25 cm long, insert it into the loops and tie it with a knot.

In this master class I will tell you how to crochet an old flower pot. An unnecessary plastic thing will turn into a wonderful DIY planter! In addition, such cozy knitted pots are not sold in stores - your work will turn out unique.

You will need a plain pot, yarn, and a hook. Even the kind of pot that a flower shop sells flowers in is suitable. The type of yarn also does not matter - in the photo I have pink wool blend.

We will knit without a bottom. This is the most convenient way, because such a cover can be removed and washed, and the hole in the bottom of the pot will not be closed. Pattern pattern for knitting a flower pot:

It is clear that this scheme is not suitable for all sizes of pots. Therefore, if you have a larger pot, then add rows of double crochets.

We collect a chain of air loops, the length equal to the circumference of the pot at the bottom, + 2-3 loops for a loose fit. We will follow the process using step-by-step photos:

We knit the first three rows. If the pot expands sharply upward, then in the third row we add a couple of double crochets:

Now we knit the pattern according to the diagram. The pattern is simple, I think there is nothing to explain here:

We roughly estimate how much is left to the side and knit it to it, alternating rows of double crochets and rows of alternating stitches and chain loops. Again, if the pot expands sharply, then in the rows of columns we double the loops in places. The end result will be the same as in the lower part - a pattern with windows. And we finish with a wavy border - it is knitted like this: *five double crochets in one loop, skip 2 loops, double crochet, skip 2 loops* - repeat. Result:

This is how the crocheted pot turned out. Thanks to the border, the knitted part was tightly fixed. If for some reason it doesn’t stick to you, then you can put it on Moment glue in a couple of places at the top.

Introduces you to how to knit such a flowerpot.

In order to knit a pot like this you will need:

20 grams of bobbin yarn No. 10 yellow, a little brown, hook n DIY crocheted flower pot number 1

Size of flowerpot (flower pot) It turns out like this - diameter - 16 centimeters, height 18 centimeters. Knit the flowerpots in a circle using patterns 1 and 2. In pattern 2, the first row is the last row of the pattern according to pattern 1. The numbers in the pattern indicate the rows, and under the arches the number of air loops in them is indicated.

The bottom must be knitted with yellow yarn, using pattern 1. First, knit a chain of 6 air loops and close it into a ring. Then you need to knit one lifting chain stitch and knit 11 single crochets into a ring.

The row is closed with a connecting column. In diagram 1 this is the first row. When the bottom is knitted, then you need to knit with a chain stitch and tie the 15th and last rows (look at the photo)

After finishing work, the pots need to be washed and starch very much. Then, while it is still wet, put it on a jar, for example a two-liter jar, and let it dry.

Many of us have accumulated a lot of old flower pots; they are good quality, convenient and natural. It’s just a pity that over time they have lost their former beauty, but that’s not a problem! For our old pot, we can crochet some cute clothes - flower pots in the shape of cute bunnies. Today's master class is dedicated to such a simple but effective flowerpot for an old pot. It will not be difficult to knit, so even beginner knitters can take on such a cute “clothes”.

For a knitted flower pot we will need:

Knitting threads color coffee with milk;
Embroidery threads black and pink;
A flower pot.

Now let's start knitting flowerpots:

1. Crochet a chain of 5 air loops and close them into a ring on the sixth. We will knit the second row with single crochets.

2. Using the same single crochet stitches, knit a circle equal to the diameter of the bottom of the pot. By the way, it is better to use thicker threads for knitting so that they hold their shape and last longer.

3. When the bottom for the flowerpot is knitted, we will go through one row with a half-stitch to mark the bottom line, and then we will continue to knit the subsequent rows with a single crochet. In order to reach the side walls of the flower pots, the first row after the half-column row should be knitted behind the back wall of the loops of the previous row. This way we will get a clear and beautiful line for the bottom of the pot.

4. We will knit the walls of the flower pot without removing the flower pot - this way they will fit better and you can adjust the size of the walls of the flower pot depending on the size of the pot.

5. When the flowerpot is connected, we will tie the long ears like a hare’s with the same half-column.

6. We will sew the knitted ears to the edge of the flowerpot, embroider the eyes and nose with black threads, and then the necks of our bunny with pink threads.

So our cute clothes for the old flower pot are ready. Now any flower will look uniquely stylish in it. An interior with several of these flowerpots - hares - will look very interesting. Let your home always be warm and cozy. And old things that have received a new life will give your home special comfort and warmth!